Skip to content
EN

Deye · PV inverters · Deye SUN-SG05LP1-EU (single-phase hybrid inverter, 3.6–8 kW)

F56DC busbar voltage is too low

Name in the manufacturer's documentation (user manual): DC busbar voltage is too low[1]

In plain words (editorial)

The internal DC bus voltage is too low. The manual says to check whether the battery voltage is too low and, if so, charge the battery from PV or the grid.

When to call a service technician: If the battery is fine and the code stays, contact the installer.

✎ editorial – written from the cited sources, not a manufacturer statement. Status: draft.

The Polish page has more detail (plain-language explanation, safe checks, guides): Read in Polish →

Sources

Every statement has a footnote to the document and PDF page. “Quote verified” means the quote was found automatically in the text of that page.

  1. [1] Hybrid Inverter User Manual – SUN-3.6K/5K/6K/7K/7.6K/8K-SG05LP1-EU (ed. 2024-08) (instructions_sun-3.6-8k-sg05lp1-eu_240813_en) , p. 47 official manufacturer document quote verified F56 DC busbar voltage is too low
  2. [2] Hybrid Inverter User Manual – SUN-3.6K/5K/6K/7K/7.6K/8K-SG05LP1-EU (ed. 2024-08) (instructions_sun-3.6-8k-sg05lp1-eu_240813_en) , p. 47 official manufacturer document quote verified Check whether battery voltage is too low
  3. [3] Hybrid Inverter User Manual – SUN-3.6K/5K/6K/7K/7.6K/8K-SG05LP1-EU (ed. 2024-08) (instructions_sun-3.6-8k-sg05lp1-eu_240813_en) , p. 47 official manufacturer document quote verified If the battery voltage is too low, using PV or grid to charge the battery
  4. [4] Hybrid Inverter User Manual – SUN-3.6K/5K/6K/7K/7.6K/8K-SG05LP1-EU (ed. 2024-08) (instructions_sun-3.6-8k-sg05lp1-eu_240813_en) , p. 47 official manufacturer document quote verified Seek help from us, if can not go back to normal state